Home Tech Web.com Reviews Provides You with The Ultimate Guide to Clean Your AirPods

Web.com Reviews Provides You with The Ultimate Guide to Clean Your AirPods

852
0

Introduction

Cleaning your AirPods i.e. the wireless Bluetooth Apple earbuds is a task that is not as simple as it sounds. Without the proper knowledge of cleaning it, it is very likely that you might cause severe damage to the product that you must have longed to purchase. In this article, Web.com Reviews shares the ultimate guide to cleaning your AirPods.

The Ways

The ways to clean your AirPods properly are listed below:

  1. Be careful about the earwax- The first golden rule to clean the AirPods is to not wait until the earwax hardens. When the earbud is warm, the wax is still soft, and it can be sticky. Do not use water to clean it. It might seem easier to use a fluid, but it is not a good idea. After all, AirPods are not waterproof and AirPods Pro is merely water-resistant.

If you go through the instructions provided by Apple, you’d notice that they also recommend avoiding water while cleaning AirPods.

  1. Clean with a microfiber cloth and cotton swab- Instead of water, you can use a soft microfiber cloth. If you regularly use the AirPods or it gets shuffled daily inside your bag or pocket, there are chances it would turn dirty in a few days. Along with the dry and lint-free cloth piece, take a dry cotton swab too.

This way, the minute areas of the AirPod would be easier to clean more properly. While removing the gunk, you may try a little bit of alcohol to rub on the swab. Water does not get dry easily and it damages the inner machinery parts of the gadget. So, avoid it.

  1. Use a soft-bristled brush- To remove the dirt carefully, always use a soft-bristled brush. To start, put the earbuds downward and rub with the brush gently. Remember, too much pressure will definitely damage the components.

Also, if the earbuds are held downwards, you will not have to worry about the debris. Keep your hands clean and steady while cleaning. The little cracks and crevices can be full of dust and grimes. So, gently scrub with the cotton swab to clean it perfectly.

  1. Clean the sensor and the speaker properly- Do not forget to clean the sensors too. And for the grill area of the speaker, use a Q-tip first. If this doesn’t help, use a pointed object like a toothpick to clean out the dirt of the speaker mesh.

However, keep in mind that the process should be done with extreme caution. Otherwise, you might end up damaging the sensor, the speaker, or both.

Conclusion

As earwax grows quickly, the earbuds of AirPods can get dirty within a very short period of time because they’re worn inside your ears. Do not ever leave it like that. According to Web.com Reviews, AirPods are a very sensitive gadget and without proper cleaning and caring, it will stop functioning.