Panel blinds are an excellent choice for the bedroom and bathroom. They are available in a variety of styles and sizes, but there are some tips about PATTERN BLINDS
Choose the right kind of fabric.
Keep it simple and classic.
Use the right kind of hardware blinds for your application.
Think about where you want to hang them and then measure and cut accordingly.
Don’t be afraid to experiment with different kinds of fabric or colors – both will help set your blinds apart from the crowd!
Always use proper installation instructions when hanging your blinds, or they won’t work properly in any case!
Consider adding a valance around your window treatment – this will help cover up any unsightly gaps between panels and give an even more finished look to your window treatment!
Secret of PATTERN BLINDS
The most important thing is to keep the pattern fabric from touching the ceilings and walls. This can be achieved by using a molding or channel system.
If you are using a channel system, make sure that you use one that has a continuous groove down the center of each panel, as this will prevent your panels from sagging over time if they are not perfectly aligned with each other.
When installing an adhesive strip, you should always use high-quality adhesives that are designed for indoor use and have been tested for long-term durability in direct sunlight conditions or extreme temperatures such as those found in your home during summer months or on colder winter days when you open your windows to let in some fresh air!
You do not want to purchase blinds where there is any kind of gap between the bottom of your window and the floor because this can cause problems with drafts during the winter months when cold air seeps through these gaps and gets trapped inside your home (causing unwanted clutter in corners of rooms), or even worse – it could damage your furniture!
Some people choose to apply their custom-made curtains over top of their existing curtains; however, this can cause problems in terms of quality and texture.
Rules about PATTERN BLINDS
The following rules apply when you’re installing pattern-cut blinds:
Measure your window before ordering. If you have a standard-width window, use the measurements given in the pattern illustrations to determine the correct size of your blinds. If your window isn’t standard, measure it before ordering and make sure it’s within 1/8″ of the length and width indicated in our Illustrations.
We recommend that you measure from the top of each side of your window down to the finished floor line, including any jambs (the vertical flanges that separate one piece of wood from another).
Measure by pressing firmly on a ruler against both sides of each blind or curtain panel; this will give you accurate measurements for both sides of each panel or curtain panel. The top rail should be measured from its top center edge to its bottom center edge.
