Are you thinking about installing a new well on your property? That’s an excellent idea if you live in Willcox. After all, the region rarely sees any rainfall.
Getting a reliable water source could alleviate some of the concerns that come with that issue. However, it’d help if you were smart about it. In short, look for contractors that offer well drilling Willcox, AZ.
But what if you are already familiar with handling the equipment? You could try it if you’re okay with digging anywhere from 100 to 1000 feet. Yes, that’s how deep most wells go.
Still, you aren’t alone if you thought installing a well was easy. Most people make some basic mistakes while going about it. Want to know what they are? Let’s get to it, then!
Elementary, my friend
The average person doesn’t know enough about drilling procedures. That’s understandable, considering these tasks require highly trained professionals. However, in their ignorance, people tend to avoid some crucial elements.
Here are three of those things:
- Not investing in the proper components
Most contractors offeringwell drilling Willcox,AZ, will list the necessary project components in the initial outline. This includes the pressure and pump systems alongside the motors that run them.
Refusing to let the drilling team install what they’d like to save some money isn’t the best idea here. Doing that will only increase the risk of the components failing later. Worst case scenario: it’ll lead to mud contamination or borehole instability. That’ll end up costing you even more.
Remember, a well is meant to be a long-term solution. If you’re going to get one, get it the right way.
- Refusing to hire surveyors
The drilling team you hire has one job: Installing the well. It’s not their responsibility to figure out the right place to dig, nor should they be blamed if the site is a complete bust. That specific task belongs to surveyors.
Consider this: Willcox is primarily an agricultural community with several vineyards, grape plantations, and rural ranches. Now, if a commercial farmer were to install a well on their property, besides the cost, they’d also need to factor in:
- Any underground electrical equipment or piping
- The proximity of the farming lands to the water source
This is where a surveyor can help you. They’ll tell you if a dig site holds enough water and, more importantly, help the contractors plan the logistics around the installation process.
- Forgetting to check water and soil quality
If you didn’t know already, you should now: The soil quality will affect how long the drilling process takes. This is especially relevant to anyone living in Arizona. Since there’s hardly any rainfall, the ground will probably have large amounts of granite, dirt, and bare bedrock. All those things may add a significant number of hours to the installation process.
Additionally, before hiring contractors, you must test the water quality. Several particles may make the desired water source unsuitable for consumption or agricultural use. A high chemical concentration is just one example here.
So, accounting for these things will ensure that the hired contractors don’t face any problems halfway through the project.
Flourishing water, beautiful lands
Now that you know about what you need to look for when getting a well installed, here’re a few more tips:
- Get an estimate about the entire cost of the project from the contractors first
- Ensure that the people you hire have at least a few decades of experience
- Invite the drilling team to have a look at your property
If you do things properly and take your contractors’ advice, you’ll soon be looking at an expertly installed well. And, as you already know, clean water can make a world of difference for anybody.
